WAC 296-863-40020. Meet these requirements when the operator leaves the normal operating position

(1) You must make sure operators do the following when getting off the PIT: (a) Fully lower the load engaging means; (b) Neutralize the controls; (c) Set the brakes. (2) Make sure operators do the following when leaving a PIT unattended: (a) Fully lower the load engaging means; (b) Neutralize the controls; (c) Shut off power; (d) Set the brakes; (e) Block the wheels, if parked on an incline. Note: A PIT is unattended when the operator: 1. Is more than twenty-five feet away; or 2. Cannot see the PIT.