Washington · Regulations
Chapter 296-150V — CONVERSION VENDOR UNITS AND MEDICAL UNITS
85 sections
85 sections
- WAC 296-150V-0010WAC 296-150V-0010. Authority, purpose, and scope
- WAC 296-150V-0020WAC 296-150V-0020. What definitions apply to this chapter?
- WAC 296-150V-0030WAC 296-150V-0030. How is this chapter enforced?
- WAC 296-150V-0040WAC 296-150V-0040. Is manufacturing information kept confidential?
- WAC 296-150V-0050WAC 296-150V-0050. Can you prohibit the sale or lease of a conversion vendor unit or medical unit?
- WAC 296-150V-0060WAC 296-150V-0060. Who handles consumer complaints about conversion vendor units or medical units?
- WAC 296-150V-0070WAC 296-150V-0070. Do you have reciprocal agreements with other states to inspect conversion vendor units and medical units?
- WAC 296-150V-0080WAC 296-150V-0080. Do you allow a local enforcement agency to inspect conversion vendor units and medical units at the manufacturing location?
- WAC 296-150V-0100WAC 296-150V-0100. What happens if I disagree with your decision regarding my compliance with this chapter?
- WAC 296-150V-0110WAC 296-150V-0110. Do you have an advisory board to address conversion vendor unit and medical unit issues?
- WAC 296-150V-0120WAC 296-150V-0120. Where can I obtain technical assistance regarding conversion vendor units or medical units?
- WAC 296-150V-0140WAC 296-150V-0140. Do you allow the use of alternate materials, design, or method of construction?
- WAC 296-150V-0200WAC 296-150V-0200. Who must obtain conversion vendor unit or medical unit insignia?
- WAC 296-150V-0210WAC 296-150V-0210. What are the insignia requirements?
- WAC 296-150V-0220WAC 296-150V-0220. How do I obtain insignia information and the required forms?
- WAC 296-150V-0230WAC 296-150V-0230. What are the insignia application requirements?
- WAC 296-150V-0240WAC 296-150V-0240. What documentation do you need to perform an alteration inspection?
- WAC 296-150V-0250WAC 296-150V-0250. How do I replace lost or damaged insignia?
- WAC 296-150V-0300WAC 296-150V-0300. When is design-plan approval required?
- WAC 296-150V-0310WAC 296-150V-0310. Who can approve design plans?
- WAC 296-150V-0320WAC 296-150V-0320. What must I provide with my request for conversion vendor unit or medical unit design-plan approval by the department?
- WAC 296-150V-0340WAC 296-150V-0340. When is an engineering analysis or structural load test for design plans required?
- WAC 296-150V-0350WAC 296-150V-0350. What must test procedures and results for design plans include?
- WAC 296-150V-0380WAC 296-150V-0380. What happens if you approve my design plan?
- WAC 296-150V-0390WAC 296-150V-0390. If my design plan is not approved, how much time do I have to submit a corrected design plan?
- WAC 296-150V-0400WAC 296-150V-0400. What happens after my design plan is approved?
- WAC 296-150V-0410WAC 296-150V-0410. When does my design plan expire?
- WAC 296-150V-0415WAC 296-150V-0415. Who approves addendums to design plans?
- WAC 296-150V-0420WAC 296-150V-0420. Who can be authorized to approve design plans?
- WAC 296-150V-0430WAC 296-150V-0430. What information must a professional or firm provide to be authorized to approve design plans?
- WAC 296-150V-0440WAC 296-150V-0440. How will I know whether I am authorized to approve design plans?
- WAC 296-150V-0450WAC 296-150V-0450. How long is a licensed professional or firms authorization effective?
- WAC 296-150V-0460WAC 296-150V-0460. What information must a manufacturer send to the department when a professional or firm does the design-plan approval?
- WAC 296-150V-0470WAC 296-150V-0470. What happens after we receive the professional or firm approved design plan and information?
- WAC 296-150V-0480WAC 296-150V-0480. Do you have a list of professionals or firms that are authorized to approve design plans?
- WAC 296-150V-0490WAC 296-150V-0490. Who approves addendums to design plans approved by a professional or firm?
- WAC 296-150V-0495WAC 296-150V-0495. Contractor deposit accounts
- WAC 296-150V-0500WAC 296-150V-0500. When is an inspection required?
- WAC 296-150V-0510WAC 296-150V-0510. How do I request an inspection?
- WAC 296-150V-0520WAC 296-150V-0520. What happens if my conversion vendor unit or medical unit passes inspection?
- WAC 296-150V-0530WAC 296-150V-0530. Am I charged if I request an inspection but I am not prepared?
- WAC 296-150V-0540WAC 296-150V-0540. Who inspects a conversion vendor unit or medical unit installation at the building site or event location?
- WAC 296-150V-0550WAC 296-150V-0550. Do you allow a conversion vendor unit or medical unit to be completed at the installation site?
- WAC 296-150V-0560WAC 296-150V-0560. What happens if I receive a notice of noncompliance after inspection of the alteration to my conversion vendor unit or medical unit?
- WAC 296-150V-0580WAC 296-150V-0580. Must I obtain an insignia for used conversion vendor units or medical units?
- WAC 296-150V-0590WAC 296-150V-0590. How do I obtain insignia for used conversion vendor units or medical units?
- WAC 296-150V-0700WAC 296-150V-0700. Must manufacturers of conversion vendor units and medical units notify you if they manufacture at more than one location?
- WAC 296-150V-0710WAC 296-150V-0710. Must manufacturers of conversion vendor units and medical units notify you of a change in business name or address?
- WAC 296-150V-0720WAC 296-150V-0720. Must manufacturers of conversion vendor units and medical units notify you of a change in business ownership?
- WAC 296-150V-0800WAC 296-150V-0800. What codes apply to conversion vendor units and medical units?
- WAC 296-150V-0930WAC 296-150V-0930. When are structural load tests or structural calculations required?
- WAC 296-150V-0950WAC 296-150V-0950. What requirements apply to roof coverings?
- WAC 296-150V-1040WAC 296-150V-1040. Are there floor requirements?
- WAC 296-150V-1070WAC 296-150V-1070. What requirements apply to floor closure material?
- WAC 296-150V-1090WAC 296-150V-1090. What are the standards for equipment and installations?
- WAC 296-150V-1100WAC 296-150V-1100. What are the flame-spread limitations?
- WAC 296-150V-1110WAC 296-150V-1110. Combustible limitations
- WAC 296-150V-1120WAC 296-150V-1120. What are the standards for wall and cabinet protection?
- WAC 296-150V-1170WAC 296-150V-1170. What are the light and ventilation requirements?
- WAC 296-150V-1180WAC 296-150V-1180. What requirements apply to conversion vendor unit exits?
- WAC 296-150V-1185WAC 296-150V-1185. What exit door requirements apply to self-propelled medical unit exits?
- WAC 296-150V-1190WAC 296-150V-1190. Interior privacy locks
- WAC 296-150V-1303WAC 296-150V-1303. How must storage batteries be installed in a conversion vendor unit or medical unit?
- WAC 296-150V-1330WAC 296-150V-1330. What are the mechanical requirements for a conversion vendor unit or medical unit?
- WAC 296-150V-1350WAC 296-150V-1350. What are the LPG system enclosure and mounting requirements for a conversion vendor unit or medical unit?
- WAC 296-150V-1360WAC 296-150V-1360. What are the fuel gas piping design requirements for a conversion vendor unit or medical unit?
- WAC 296-150V-1380WAC 296-150V-1380. Can gas tubing be concealed in a conversion vendor unit or medical unit?
- WAC 296-150V-1390WAC 296-150V-1390. What are the pipe-joint compound requirements for gas piping in a conversion vendor unit or medical unit?
- WAC 296-150V-1400WAC 296-150V-1400. What are the gas piping hanger and support requirements for a conversion vendor unit or medical unit?
- WAC 296-150V-1410WAC 296-150V-1410. What are the electrical bonding requirements for gas piping in a conversion vendor unit or medical unit?
- WAC 296-150V-1420WAC 296-150V-1420. How are gas supply connections in a conversion vendor unit or medical unit identified?
- WAC 296-150V-1430WAC 296-150V-1430. What requirements apply to gas piping system openings?
- WAC 296-150V-1440WAC 296-150V-1440. Are gas piping shut-off valves required in a conversion vendor unit or medical unit?
- WAC 296-150V-1450WAC 296-150V-1450. What requirements apply to testing for gas piping leaks before conversion vendor unit or medical unit appliances are connected?
- WAC 296-150V-1460WAC 296-150V-1460. What requirements apply to testing for gas piping leaks after conversion vendor unit or medical unit appliances are connected?
- WAC 296-150V-1470WAC 296-150V-1470. What are the requirements for appliance installations?
- WAC 296-150V-1530WAC 296-150V-1530. What general plumbing requirements apply?
- WAC 296-150V-1540WAC 296-150V-1540. What are the plumbing definitions?
- WAC 296-150V-1550WAC 296-150V-1550. What requirements apply to drain outlets?
- WAC 296-150V-1560WAC 296-150V-1560. What is the minimum clearance for drain outlets?
- WAC 296-150V-1570WAC 296-150V-1570. What requirements apply to water-supply connections?
- WAC 296-150V-1580WAC 296-150V-1580. What requirements apply to water heater relief valves and safety devices?
- WAC 296-150V-1590WAC 296-150V-1590. What requirements apply to waste holding tanks for conversion vendor units?
- WAC 296-150V-1600WAC 296-150V-1600. What are the requirements associated with medical and conversion vending units that have been manufactured and used outside the state according to RCW 43.22.380 ?
- WAC 296-150V-3000WAC 296-150V-3000. Conversion vendor units and medical units — Fees